Caple FSCHW5 User Manual download pdf (Page 3)

MOUNTING OF THE HOOD IN THE LOWER PART OF A HANGING CUPBOARD

Drill 4 holes of 6mm diameter at the bottom of the hanging cupboard as shown in the drawing

fig.1.

Fit the hood in the cabinet with 4 screws, which are appropriate to that kind of cupboard.

The appliance is provided with 2 air outlets, one which is in the upper part and the other on

the back. Both of them can be used according to your requirements. A connecting ring ©, to

join the connecting pipe to, and a cover (A) to close the air outlet, which is not used, are

supplied.

MOUNTING OF THE HOOD ON THE WALL

Drill 4 holes on the wall, which correspond to the position (B-Z) of the drawing fig.1.

Hang the hood on the 2 holes using the screws and dowels with expanding plug, which are

appropriate for that kind of wall (ex. concrete, plasterboard etc.)

Fix the hood through the 2 security holes (Z).

CHANGING FROM EXHAUSTING METHOD TO FILTERING METHOD

In order to make this change, carbon filters CAP19CF are included. Active carbon filters are

necessary to purify the air, released into the room. Filters are not washable; they cannot be

regenerated and have to be replaced at most every 4 months. The saturation of the activated

charcoal depends on the prolonged use of the hood, on the type of cooking and on the

regularity of cleaning the grease filter. The filter (D) has to be applied to the aspirating group,

which is inside the hood hitting the centre of the group with it and turning it of 90 degrees until

the stop click is heard to lock it. Remove the grill (G) to carry out this operation. Close with the

appropriate covers the upper and back air outlets; turn the small lever (L) from the position (A)

to the position (F).In this way the hood is ready for the filtering function.

1 2 3 4 5

No comments

Caple FSCHW5 User Manual Page 3