Caple CR 9100 Instruction Manual download pdf (Page 5)

5

This appliance must be connected to a

double pole isolating switch (fig. 1.1) and

to the terminal block in the cooker (figs.

1.2 & 1.3) using the following guide:

FUSE

DOUBLE POLE SWITCHED

FUSED SPUR OUTLET

USE A 19 AMP FUSE

ON

Fig. 1.1

1) The wire which is coloured brown

must be connected to the terminal

marked L (Live), or coloured Red.

2) The wire which is coloured blue

must be connected to the terminal

marked N (Neutral), or coloured

Black.

3) The wire which is coloured green

and yellow must be connected to

the terminal marked E (Earth)

or coloured Green.

IMPORTANT: These connections must

be carried out by a qualified electrical

engineer.

CONNECTING FEEDER CABLE

To connect the feeder cable to the cook-

er it is necessary to:

– Remove the screw that hold shield “A”

behind the cooker (fig. 1.2).

– Insert the feeder cable of the suitable

section (as described in the next chap-

ter) into the cable clamp “D”.

– Connect the phase and earth cables to

the terminal block “B” according to the

diagram in figure 1.3.

– Pull the feeder cable and block it with

cable clamp “D”.

– Re-mount shield “A”.

Fig. 1.2

D

B

A

230 V

PEN

L

1

(L2)

Fig. 1.3

FEEDER CABLE SECTION

type H05RR-F

230 V 3 x 1,5 mm

2

PE

1 - Electrical Installation - Wall box connection

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments