Caple CR 13400 Instruction Manual download pdf (Page 12)

12

Conversion to LPG

J

Fig. 3.3b

Fig. 3.3a

J

F

Fig. 3.4

Minimum burner setting

adjustment

In the minimum position the flame must

have a length of about 4 mm and must

remain lit even with a quick turn from the

maximum position to that of minimum.

The flame adjustment is done in the fol-

lowing way:

– Turn on the burner

– Turn the tap to the MINIMUM position

– Take off the knob

– With a thin screwdriver pass by the

hole of microswitch and turn the screw

F until adjustment is correct (fig. 3.4).

Normally for G30/G31, tighten up the

regulation screw.

The burners are conceived in such a

way so as not to require the regula-

tion of the primary air.

Conversion procedure

Injectors replacement

Select the injectors to be replaced

according to the “Table for the choice of

the injectors” (page 13).

Injectors not supplied can be

obtained from the After-Sales

Service.

To replace the injectors proceed as fol-

lows:

- Remove pan supports and burners

from the cooktop.

- Using a wrench, substitute the nozzle

injectors “J” (fig. 3.3a, 3.3b) with those

most suitable for the kind of gas for

which it is to be used.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments