Caple CR 13400 Instruction Manual download pdf (Page 41)

Correct replacement of the burners

It is very important to check that the burner flame distributor F and the cap C has been

correctly positioned (see fig. 11.1-11.2) - failure to do so can cause a poor burner flame

and/or damage to the burner and hob.

Check that the electrode “S” (fig. 11.1) is always clean to ensure trouble-free sparking.

Check that the probe T (fig. 11.1) next to each burner is always clean to ensure correct

operation of the safety valves.

Both the probe and ignition plug must be very carefully cleaned.

Triple ring burners

The triple ring burner must be correctly positioned (see fig. 11.5); the burner rib must

be enter in their logement as shown by the arrow see fig. 11.3).

Then position the cap A and the ring B (fig. 11.4 - 11.5).

The burner correctly positioned must not rotate (fig. 11.4).

Fig. 11.3

Fig. 11.4

Fig. 11.5

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

No comments

Caple CR 13400 Instruction Manual Page 41