Caple CR 9100 Instruction Manual download pdf (Page 6)

800 mm

500 mm

50 mm

500 mm

Fig. 2.1

2 - Location

FOR THE INSTALLER

This cookers has class “2/1” overheating protection so that it can be installed next

to a cabinet.

The furniture walls adjacent to the cooker must be made of material resistant to heat.

The veneered syntetical material and the glue used must be resistant to a temperature

of 120°C in order to avoid ungluing or deformations.

If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop,

a gap of at least 50 mm must be left between the side of the cooker and the furniture.

The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in

a room containing a bath or shower.

Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.

It is essential that the cooker is positioned as stated below.

If the cooker is located on a pedestal it is necessary to provide safety measures to pre-

vent falling out.

The cooker must be installed by a qualified technician and in compliance with

local safety standards.

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

No comments

Caple CR 9100 Instruction Manual Page 6