Caple Wi151 Specifications download pdf (Page 11)

100

101

LI-13

LIGHTING SYSTEM

Headlight Bulb

11.Headlight Bulb

A: REMOVAL

1. HIGH BEAM AND LOW BEAM

CAUTION:

• Because the halogen bulb operates at a high

temperature, dirt and oil on the bulb surface re-

duces the bulb’s service life. Hold the flange

portion when replacing the bulb. Never touch

the glass portion.

• Do not leave the headlight without a bulb for

a long time. Dust, moisture, etc. entering the

headlight may affect its performance.

1) Disconnect the ground cable from battery.

2) Remove the air intake duct. (When removing the

headlight bulb RH).

3) Remove the battery cover. (When removing the

headlight bulb LH).

4) Tilt the washer tank filler neck. (When removing

the headlight bulb LH).

5) Disconnect the harness connector.

6) Remove the bulb assembly (A) to remove high

beam. To remove the low beam, remove the back

cover (B), and then go to Step 7.

7) Remove the light bulb retaining spring (A) to re-

move bulb.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1) Visually check the bulb for blow out.

2) Check the bulb specification.

<Ref. to LI-2, SPECIFICATION, General Descrip-

tion.>

3) If NG, replace the bulb with a new one.

LI-00273

LI-00437

(B)

(A)

LI-00279

(A)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 100 101

Comments to this Manuals

No comments

Caple Wi151 Specifications Page 11

Comments to this Manuals

Related products and manuals for Small kitchen appliances Caple Wi151