Caple Wi151 Specifications download pdf (Page 17)

LI-19

LIGHTING SYSTEM

Side Turn Signal Light Assembly

17.Side Turn Signal Light As-

sembly

A: REMOVAL

1) Disconnect the ground cable from battery.

2) Remove the scalp caps. <Ref. to GW-18, RE-

PLACEMENT, Scalp Cap.>

3) Remove the mirror. <Ref. to GW-21, REPLACE-

MENT, Outer Mirror.>

4) Disconnect the harness connector, remove the 3

mounting screws and then remove the side turn

signal light assembly.

B: INSTALLATION

Install in the reverse order of removal.

C: INSPECTION

1) Install the side turn signal light assembly and

check that it blinks normally.

2) If it does not blink normally, replace the side turn

signal light assembly with a new one.

NOTE:

Since LED (Light Emitting Diode) is used for side

turn signal light, replace the side turn signal light

assembly when the LED is powered off.

LI-00293

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 100 101

No comments

Caple Wi151 Specifications Page 17