Caple Wi151 Specifications download pdf (Page 91)

100

101

GW-15

GLASS/WINDOWS/MIRRORS

Front Door Glass

11) Make the same adjustment of two adjusting

bolts of rear sash.

ST 61299AE000 SPACER (Glass thickness: 5

mm (0.197 in) for front door

glass)

NOTE:

Do not tilt the sash bracket to inner panel during ad-

justment. Otherwise smooth regulator operation

cannot be achieved.

12) Make adjustment of front sash in the same

manner as that of rear sash.

NOTE:

Although front and rear sashes must, as a rule, be

adjusted in the same manner, in some door instal-

lation, the adjustment in a different manner may be

required. However, adjustment of one sash to the

maximum amount and the other to the minimum

amount is not permitted. Such adjustment may re-

sult in application of excessive load to regulator.

13) After adjustments, tighten the nuts.

14) After adjustment of the glass, close the door. If

there is a gap between outer lip of gusset and glass

surface, adjust the gap with adjusting bolt (A) in

lower fitting part of gusset to prevent generation of

wind noise.

15) During adjustment, loosen the other three

clamping bolts.

16) After adjustment, tighten the bolts and nuts.

(1) 3.2 — 4.8 mm (0.126 — 0.189 in)

(2) 3.0 mm (0.118 in): when replacing weather

stripe with a new one

5.5 mm (0.217 in): when re-using weather

stripe

(3) ST

(1) Sash bracket

(2) Rear sash

(3) Adjust a line parallel

(4) Sash

(5) Inner panel

GW-00336

(2)

(1)

(3)

GW-00270

(1)

(2)

(4)

(3)

(5)

GW-00271

(A)

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 100 101

Comments to this Manuals

No comments

Caple Wi151 Specifications Page 91

Comments to this Manuals

Related products and manuals for Small kitchen appliances Caple Wi151