Caple Wi151 Specifications download pdf (Page 50)

100

101

WW-16

WIPER AND WASHER SYSTEMS

Front Washer Nozzle

8. Front Washer Nozzle

A: REMOVAL

1) Remove the front hood insulator. <Ref. to EB-

13, FRONT HOOD INSULATOR, REMOVAL,

Front Hood.>

2) Hold the pawl of washer nozzle (A) toward the

arrow direction, and remove the washer nozzle.

3) Remove the washer hose from washer nozzle.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust the washer nozzle position. <Ref. to WW-

16, ADJUSTMENT, Front Washer Nozzle.>

C: INSPECTION

• Make sure the nozzle and hose are not clogged.

• Make sure the hose is not bent.

D: ADJUSTMENT

1) Turn the wiper switch to OFF position.

2) While the vehicle is at standstill, adjust the wash-

er injection position as shown in the figure.

Injection position:

A: 250 mm (9.84 in)

B: 435 mm (17.13 in)

Injection angle should be adjusted with 0.5 mm

(0.020 in) thickness steel scale. Use maximum

thickness of 0.5 mm steel scale, because the injec-

tion slit width of washer nozzle is 0.6 mm (0.024 in).

Adjusting with a flat tip driver may damage the in-

jection slit and cause the faulty injection.

(1) Nozzle

(A)

WW-00177

WW-00161

(1)

(1) Inside of washer nozzle injection

(2) 0.6 mm (0.024 in)

(3) Steel scale

(4) Max. 0.5 mm (0.020 in)

(4)

(3)(1)

(2)

WW-00212

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 100 101

Comments to this Manuals

No comments

Caple Wi151 Specifications Page 50

Comments to this Manuals

Related products and manuals for Small kitchen appliances Caple Wi151